Payment & Shipping Terms:
Convenience Transportation Hydraulic Pile Breaker 690kN With 180mm Cylinder Stroke
The cylinder is installed from the structural part’s top to its end. The force goes to the whole structural parts, protect the bolt from breaking off.
The alloy bit and cylinder are connected in the middle of the alloy bit. Uniformly forced, the machine won’t be damaged during working. The material of our alloy bit is military use alloy steel, with higher strength and longer using life, it can cut 5000 nos. of piles.
Chain: Professional hoisting chain with single lifting capacity of 5t, diameter 14mm,offering high safety guarantee. Equipped with adjusting buckles, the chain’s length could be adjusted according to jobsite condition easily
Structural parts—Both the material and techniques are more matured, with high standard quality control and long service life.
The two pins are used for fixing the modules and have the limit role, which is not only instead of top metal ring frame to reduce weight of the whole machine, but also avoid the pile colliding the top metal ring frame during the pile breaking.
|SP400-B technical parameters|
|Range of Pile diameter(mm)||1700-1850mm|
|Maximum Drill rod pressure||690KN|
|Maximum strake of hydraulic cylinder||180mm|
|Maximum pressure hydraulic cylinder||34.3Mpa|
|Maximum flow single cylinder||25L/min|
|Cut the number of pile/8h||40-100|
|Height for cut pile each time||≤300mm|
|Supporting the digging machine tonnage (excvavtor)||≥35t|
|One piece module weight||280kg|
|One piece module size||908x680x380|
|work status dimensions||3200-3000|
|Total pile breaker weight||3.7kg|