June 6, 2016
One unit of used TR220D ROTARY DRILLING RIG
SN:509811030082
Original Caterpillar base and engine: CAT0336D
POWER: J6D00388
LOWER:L 3W00507
C-9 electric diesel engine: THX21414
Producing year: 2011.09
Working hours: 7402
One set of interlocking Kelly bar 4x14
Recondition, Good working condition.
Enclosed photos:
Side photo, in our factory dated Otc 18, 2015
side in Singapore Changi terminal 5 jobsite photo dated April 20,2016,
KDK at Changi T5 jobsite photo dated April 20,2016
back side photo dated April 20, 2016
Side photo
undercarriage
Cabin inside photo
Working hours
Working permit at airport
One interlocking Kelly bar 4x14
On Sale term:
Used TR220D Rotary drilling rig with pull down cylinder system mounted original CAT336d base, 7402 working hours, good working condition, made in 2011 year with one set interlocking kelly bar 4x14m outer diameter 440mm which can be drilled to 51m
Specification 1.base rig caterpillar 336D; C-9 engine installed power 213kw
2,max drilling depth 65 m by friction Kelly bar;
3,max hole diameter 2200mm;
4,max torque:220kN.m;
5,rotating speed 6-23rpm;
6,max crowd force of cylinder 180kn;
7,max extraction force of cylinder 200kn;
8,max pull force of main winch 220kn;
9,Total weight with kelly bar 67T Further detailed specification, please see leaflet of TR220D
Remark:
configuration by first class key components:
Base: Original Caterpillar 336D base
Engine: C-9 engine with ACERT™ technology
Hydraulic systems adopt Rexroth motor and wave
Electric systems are from Pal-Fin auto-control Rotary drive : Rexroth
Commissioning: By our engineer at your jobsite for max 7 days as required who will erect and commission the equipment together with your staff and train your staff in the operation and maintenance of the equipment Vise permits, accommodation and transport are to be provided by you. Provision of operator in excess of above period shall be governed by our General conditions for Secondment of personal.