The SD series is a lightweight, efficient, mast touching fully hydraulic crawler mounted core drilling rig designed for deep core drilling in a depth range of 200-2000m, with diameters meeting various diameter requirements such as NTW, HTW, and BTW. It has the characteristics of advanced structure, convenient use, standardized configuration, short auxiliary time, fast footage speed, low failure rate, and meets the requirements of various complex processes such as diamond cable coring and carbide drilling. It is widely used in geological engineering, diamond drilling in mining, engineering geological survey, and hydrological well engineering.

For example, SD-1000HD core drilling rig was sent to the client's construction site last month, contributing to the client's geological exploration project.

When using NTW drilling tools, the maximum drilling depth can reach 1100m. The chassis adopts steel track plates (rubber blocks can be inserted separately), and the hydraulic motor drives the built-in walking reducer to achieve walking; The frame adopts a welded structure and is welded to the tracked chassis. When the carriage is erected, it can be touched by the ground contact base to improve the rigidity of the carriage; The slewing structure consists of a hydraulic motor and a slewing box. The hydraulic motor drives the slewing gearbox, which can obtain different torques and speeds; The power system consists of an engine, a coupling, an oil pump connection plate, and an air filter. The air filter consists of a three-stage filter consisting of an air pre filter and an air fine filter, which can effectively protect the engine from normal use under harsh working conditions.

SD series full hydraulic core drilling rig is a very good equipment solution for various geological exploration applications. The rig also has a small size, good flexibility, reliable coring performance and the coring recovery rate is higher, which greatly reduces the non-productive time. Compared with the conventional mechanical drill rigs, the SD series is less maintenance extensive, runs smoother drilling, and makes the work site safer. So if you are looking for a economical, dependable and powerful solution for mineral exploration, hydrogeological or engineering geological investigations, the SD series fully hydraulic coring drilling rig is well worth considering.