Model: | SD2200 | Undercarriage: | HQY5000A |
---|---|---|---|
Engine Power: | 199kw | Rotating Speed: | 1900rpn |
Max Drilling Depth: | 75m | Max Drilling Diameter: | 2200mm |
Function: | Rotary Driling, Extruding And Expanding, Impact Hammer, Drive Casing, Wall Protection And Casing Drilling,Caterpillar Crane Hoisting, Reinforcing Cage Of Pile Driver And Lifting | ||
High Light: | 199KW Rotary Drilling Rigs,1900rpn Rotary Drilling Rigs |
SD2200 is a multi-functional full-hydraulic pile machine with advanced international technology. It can not only drill bored piles, percussion drlling, dynamic compaction on soft foundation, but also has all the functions of rotary drilling rig and crawler crane. It also surpasses the traditional rotary drilling rig, such as ultra-deep hole drilling, perfect combination with full casing drilling rig to carry out complex work. It is especially suitable for the construction of occlusive pile, bridge pile, Sea and river Port foundation pile and high precision pile foundation of subway. The new super dilling
rig has the advantages of high construction efficiency, low energy consumption and green advantages, and has the function of intellectualization and multi-purpose. The super drilling rig can be used in all kinds of complex terrain, such as Cobble and Boulder stratum, hard rock stratum, karst cave stratum and thick quicksand stratum, and can also be used to break old piles and waste piles.
Multifunctional hydraulic drill with full working condition:
1. Rotary driling function
2. Extruding and expanding function of expanded pile
3. Impact hammer function.
4. Drive casing, wall protection and casing drilling function.
5. Caterpillar crane hoisting function
6. Reinforcing cage of pile driver and lifting function of drilling tool
7. This machine is multi-functional, can use all kinds of rotary drilling buckets and drilling tools for rotary drilling, function,at the same time, make use of their own advantages of a variety of equipment in one, an engine to provide energy,energy saving, green economy.
The multifunctional hydraulic drilling rig has the following characteristics:
1. Low fuel consumption and high construction efficiency, drill pipe can be quickly raised and lowered.
2. One machine can be used for rotary drilling. It can also be used as a crawler crane and a dynamic compaction machine.
3. Heavy crawler crane chassis with super stability, suitable for large torque drilling, as well as ultra-deep hole drilling.
4. Perfect combination of full casing drilling rig for large torque casing drive, the realization of multi-functional integration of driling machinery, casing drive driling, rotary excavation, heavy hammer impact hard rock, rock grab,break old piles.
5. The super drilling rig has the advantages of high integration, small construction area, suitable for high density urban municipal infrastructure projects, marine River platform foundation construction, greatly saving auxiliary construction costs.
6. The Al technology module can be loaded to realize the intellectualization of the equipment.
Full hydraulic multifunctional drilling rig SD2200:
Model | SD2200 |
Undercarriage | HQY5000A |
Engine power | 199 kw |
Rotating speed | 1900 rpm |
Main pump flow | 2X266 L/min |
Nominal torque | 220 kN.m |
Speed of rotation | 6~27 rpm |
Spin off speed | 78 rpm |
Max drilling depth | 75 m |
Max drilling diameter | 2200 mm |
Max crowd force | 180 kN |
Max pull force | 180 kN |
Crowd stroke | 1800 mm |
Rope diameter | 26 mm |
Line pull (force 1st layer) of main winch | 200 kN |
Lind speed max of main winch | 95 m/min |
Rope diameter of auxiliary winch | 26 mm |
Line pull (force 1st layer) of auxiliary winch | 200 kN |
Outer pipe diameter of kelly bar | Φ406 |
Kelly bar (Standard) | 5X14m(Friction) |
4X14m(Interlocking) | |
Kelly bar (Extension) | 5X17m(Friction) |
4X17m(Interlocking) |
The multifunctional hydraulic drilling rig SD2200
HQY5000A Crane technical data (Lifting capacity 70 ton)
Item | Data | |||
Max rated lifting capacity | 70 t | |||
Boom length | 12-54 m | |||
Fixed jib length | 9-18 m | |||
Boom+jib max length | 45+18 m | |||
Boom derricking angle | 30-80° | |||
Hook | 70/50/25/9 t | |||
Working speed
|
Rope speed
|
Main winch hoist/lower | Rope Dia26 |
*High speed 116/58 m/min Low speed 80/40 m/min (4th layer) |
Auxiliary winch hoist/lower
|
*High speed 116/58 m/min Low speed 80/40 m/min (4th layer) |
|||
Boom hoist | Rope Dia 20 | 52 m/min | ||
Boom lower | 52 m/min | |||
Slewing speed | 2.7 r/min | |||
Traveling speed | 1.36 km/h | |||
Gradeability(with basic boom,cab in the rear) | 40% | |||
Diesel engine rated output power/rev | 185/2100 KW/r/min | |||
Whole crane mass(without grab bucket) | 88 t(with boom foot 70 ton hook) | |||
Grounding pressure | 0.078 Mpa | |||
Counterweight | 30 t |
Noted: Speed with* may vary with the load.
HQY5000A Technical Data (Tamper)
Item | Data | |||
Tamper grade | 5000 KN.m (Max12000KN.m) | |||
Rated hammer weight | 25 t | |||
Boom length (angle steel boom) | 28 m | |||
Boom working angle | 73-76° | |||
Hook | 80/50t | |||
Working speed
|
Rope speed | Main winch hoist | Rope Dia 26 | 0-95m/min |
Main winch lower
|
0-95m/min | |||
Boom hoist | Rope Dia 16 | 52 m/min | ||
Boom lower | 52 m/min | |||
Slewing speed | 2.7 r/min | |||
Traveling speed | 1.36 km/h | |||
Gradeability (with basic boom,cab in the rear) | 40% | |||
Engine power/rev | 199/1900 KW/r/min | |||
Single rope pull | 20 t | |||
Hoisting height | 28.8 m | |||
Working radius | 8.8-10.2m | |||
Main crane transportation dimension(Lx Wx H) | 7800x3500x3462 mm | |||
Whole crane weight | 88 t | |||
Grounding pressure | 0.078 Mpa | |||
Counter weight | 30 t | |||
Max single transport quantity | 48 t |
Casing rotator dia 1500MM(optional)
Main specification of casing rotator | |
Drilling diameter | 800-1500 mm |
Rotating torque | 1500/975/600 kN.m Max1800 kN.m |
Rotating speed | 1.6/2.46/4.0 rpm |
Lower pressure of casing | Max 360KN + self weight 210KN |
Pull force of casing | 2444 kN Max 2690 kN |
Pressure-pulling stroke | 750 mm |
Weight | 31 ton +( crawler optional) 7 ton |
Main specification of power station | |
Engine model | (ISUZU) AA-6HK1XQP |
Engine power | 183.9/2000 kw/rpm |
Fuel consumption | 226.6 g/kw/h( max) |
weight | 7 t |
Control model | Wired remote control |