|Color:||Yellow||Maximum Drill Rod Pressure:||790kN|
|Maximun Stroke Of Hydraulic Cylinder:||205mm||Maximum Pressure Of Hydraulic Cylinder:||31.5MPa|
|Maximun Flow Of Single Cylinder:||25L/min||Cut The Number Of Pile/8h:||120|
pile breaker machine,
hydraulic pile cutter
Fully Hydraulic Breaker SPF450B For Pile Diameter 350-450mm
The leading hydraulic pile breaker with five patented technologies and adjustable chain, it is the most efficient equipment to break the foundation plies. Due to the modular design the pile breaker can be used for breaking different sizes of piles. Equipped with the chains. it can work with different equipment to break piles.
The SPF450B hydraulic pile breaker has the following features: easy operation, high efficiency, low cost, less noise, more safty and steadibility. It imposes no impact force on the parent body of the pile and no influence on the bearing capacity of the pile, and shortens the construction period greatly. It is applicable for pile-group works and is recommended strongly by the construction department and the supervisiondepartment.
Operation steps (Apply to all Pile Breakers)
1. According to pile diameter, with reference to the construction reference parameters corresponding to the number of modules, directly connect the breakers to the work platform with a quick coupler;
2. The working platform can be excavator, lifting device and hydraulic pump station combination, the lifting device can be truck crane, crawler cranes, etc;
3. Move the pile breaker to the working pile head section;
4. Adjust the pile breaker to the suitable height (please refer to construction parameter list when crushing the pile,otherwise the chain may be broken), and clamp the pile position to be cut;
5. Adjust the excavator's system pressure according to the concrete strength, and pressurize the cylinder until the concrete pile breaks under high pressure;
6. After the pile is crushed, hoist the concrete block;
7. Move the crushed pile to the designated position.
|Range of pile diameter(mm)||350-450mm|
|Maximum Drill rod pressure||790kN|
|Maximum stroke of hydraulic cylinder||205mm|
|Maximum pressure of hydraulic cylinder||31.5MPa|
|Maximum flow of single cylinder||25L/min|
|Cut the number of pile/8h||120|
|Height for cutting pile each time||
|Supporting the digging machine Tonnage(excavator)||