Application: | Barrier Clearance, Secant Pile Wall, Pitching Of Pile | Hydraulic Parts: | Rexroth,Kawasaki |
---|---|---|---|
Warranty: | 2000 Working Hours Or One Year | Power Type: | Power Station |
Drill Accessories: | Casing, Casing Shoe, Impact Hammer | ||
High Light: | drilling equipment,foundation drilling equipment,foundation drilling |
Introduction to construction method
The casing rotator is a new type drill with the integration of the full hydraulic power and transmission, and
the combination control of machine, power and fluid. It is a new, environmentally-friendly and highly efficient drilling technology. In recent years, it is widely adopted in the projects such as
the constructions of urban subway, articulation pile of deep foundation pit enclosure, clearance of waste
piles ( underground obstructions ), high-speed rail, road and bridge, and urban construction piles, as well
as the reinforcement of reservoir dam.
The successful research of this brand new process method has realized the possibilities for the
construction workers to conduct the construction of casing pipe, displacement pile, and underground
continuous wall, as well as the possibilities for the pipe-jacking and shield tunnel to pass through the
various pile foundations without barriers, when the obstructions, such as the gravel and boulder formation,
cave formation, thick quicksand stratum, strong necking down formation, various pile foundation and steel
reinforced concrete structure, are not removed.
The construction method of casing rotator has successfully completed construction missions of more than
5000 projects at places of Singapore, Japan, Hongkong District, Shanghai, Hangzhou, Beijing and Tianjin.
It certainly will play a bigger role in the future urban construction and other pile foundation construction
fields.
( 1 ) Foundation pile, continuous wall:
l Foundation piles for high-speed rail, road and bridge and house building.
l Articulation pile constructions which are required to be excavated, such as subway platforms,
underground architectures, continuous walls
l Water retaining wall of reservoir reinforcement.
( 2 ) Drilling gravels, boulders and karst caves
l It is allowable to conduct the foundation pile construction at mountain lands with gravel and boulder
formations.
l It is allowable to conduct operation and cast the foundation piles at he thick quicksand formation and
necking down stratum or the filling layer.
l Conduct rock-socketed drilling to the rock stratum, cast the foundation pile.
( 3 ) Clear the underground obstructions
l During the urban construction and bridge rebuilding, the obstructions such as the steel reinforced
concrete pile, steel pipe pile, H steel pile, pc pile and wood pile can be cleared directly, and cast the
foundation pile on the spot.
( 4 ) Cut the rock stratum
l Conduct the rock-socketed drilling to the cast-in-place piles.
l Drill through-holes on the rock bed (shafts and ventilation holes)
( 5 ) Deep excavation
l Conduct the in-place casting or steel pipe pile inserting for the deep foundation improvement.
l Excavate deep wells for construction use in the constructions of reservoir and tunnel.
Technical parameters
TR1305H | |||
Working device | Diameter of drill hole | mm | Φ600-Φ1300 |
Rotary torque | KN.m | 1400/825/466 Instantaneous 1583 | |
Rotary speed | rpm | 1.6/2.7/4.8 | |
Lower pressure of sleeve | KN | Max.540 | |
Pulling force of sleeve | KN | 2440 Instantaneous 2690 | |
Pressure-pulling stroke | mm | 500 | |
Weight | ton | 25 | |
Hydraulic power station | Engine model | Cummins QSB6.7-C260 | |
Engine Power | Kw/rpm | 201/2000 | |
Fuel consumption of engine | g/kwh | 222 | |
Weight | ton | 8 | |
Control mode | Wired remote control/ Wireless remote control |
TR1605H | |||
Diameter of drill hole | mm | Φ800-Φ1600 | |
Rotary torque | KN.m | 1525/906/512 Instantaneous 1744 | |
Rotary speed | rpm | 1.3/2.2/3.9 | |
Lower pressure of sleeve | KN | Max.560 | |
Pulling force of sleeve | KN | 2440 Instantaneous 2690 | |
Pressure-pulling stroke | mm | 500 | |
Weight | ton | 28 | |
Engine model | Cummins QSB6.7-C260 | ||
Engine Power | Kw/rpm | 201/2000 | |
Fuel consumption of engine | g/kwh | 222 | |
Weight | ton | 8 | |
Control mode | Wired remote control/ Wireless remote control |
TR1805H | |||
Diameter of drill hole | mm | Φ1000-Φ1800 | |
Rotary torque | KN.m | 2651/1567/885 Instantaneous 3005 | |
Rotary speed | rpm | 1.1/1.8/3.3 | |
Lower pressure of sleeve | KN | Max.600 | |
Pulling force of sleeve | KN | 3760 Instantaneous 4300 | |
Pressure-pulling stroke | mm | 500 | |
Weight | ton | 38 | |
Engine model | Cummins QSM11-335 | ||
Engine Power | Kw/rpm | 272/1800 | |
Fuel consumption of engine | g/kwh | 216 | |
Weight | ton | 8 | |
Control mode | Wired remote control/ Wireless remote control |
TR2005H | |||
Diameter of drill hole | mm | Φ1000-Φ2000 | |
Rotary torque | KN.m | 2965/1752/990 Instantaneous 3391 | |
Rotary speed | rpm | 1.0/1.7/2.9 | |
Lower pressure of sleeve | KN | Max.600 | |
Pulling force of sleeve | KN | 3760 Instantaneous 4300 | |
Pressure-pulling stroke | mm | 600 | |
Weight | ton | 46 | |
Engine model | Cummins QSM11-335 | ||
Engine Power | Kw/rpm | 272/1800 | |
Fuel consumption of engine | g/kwh | 216 | |
Weight | ton | 8 | |
Control mode | Wired remote control/ Wireless remote control |
TR2105H | |||
Diameter of drill hole | mm | Φ1000-Φ2100 | |
Rotary torque | KN.m | 3085/1823/1030 Instantaneous 3505 | |
Rotary speed | rpm | 0.9/1.5/2.7 | |
Lower pressure of sleeve | KN | Max.600 | |
Pulling force of sleeve | KN | 3760 Instantaneous 4300 | |
Pressure-pulling stroke | mm | 500 | |
Weight | ton | 48 | |
Engine model | Cummins QSM11-335 | ||
Engine Power | Kw/rpm | 272/1800 | |
Fuel consumption of engine | g/kwh | 216 | |
Weight | ton | 8 | |
Control mode | Wired remote control/ Wireless remote control |
TR2605H | |||
Diameter of drill hole | mm | Φ1200-Φ2600 | |
Rotary torque | KN.m | 5292/3127/1766 Instantaneous 6174 | |
Rotary speed | rpm | 0.6/1.0/1.8 | |
Lower pressure of sleeve | KN | Max.830 | |
Pulling force of sleeve | KN | 4210 Instantaneous 4810 | |
Pressure-pulling stroke | mm | 750 | |
Weight | ton | 56 | |
Engine model | Cummins QSB6.7-C260 | ||
Engine Power | Kw/rpm | 194/2200 | |
Fuel consumption of engine | g/kwh | 222 | |
Weight | ton | 8 | |
Control mode | Wired remote control/ Wireless remote control |
TR3205H | |||
Diameter of drill hole | mm | Φ2000-Φ3200 | |
Rotary torque | KN.m | 9080/5368/3034 Instantaneous 10593 | |
Rotary speed | rpm | 0.6/1.0/1.8 | |
Lower pressure of sleeve | KN | Max.1100 | |
Pulling force of sleeve | KN | 7237 Instantaneous 8370 | |
Pressure-pulling stroke | mm | 750 | |
Weight | ton | 96 | |
Engine model | Cummins QSM11-335 | ||
Engine Power | Kw/rpm | 2X272/1800 | |
Fuel consumption of engine | g/kwh | 216X2 | |
Weight | ton | 13 | |
Control mode | Wired remote control/ Wireless remote control |