concrete pile breaker,
hydraulic pile cutter
Stroke Hydraulic Pile Breaker Low Noise With Safe Operation
SP400B Hydraulic pile breaker which can break square pile (300-450mm)
1.Max thrust: 485kN
2.Max cylinder stroke: 150mm
3.Max cylinder pressure: 31.5MPa
4.Max sigle cylinder flow: 25L/min
6.Single cut pile height≦300mm
7.Shape size: 1600x1600x2000mm
8.Total weight: 650kg
|Range of Pile diameter (mm)||300-450|
|Maximum Drill rod pressure||485kN|
|Maximum stroke of hydraulic cylinder||150mm|
|Maximum pressure of hydraulic cylinder||31.5MPa|
|Maximum flow of single cylinder||25L/min|
|Cut the number of pile/8h||160|
|Height for cutting pile each time||≦300mm|
|Supporting the digging machine Tonnage(excavator)||≧7t|
|Work status dimensions||1600X1600X2000mm|
|Total pile breaker weight||650kgs|
The cylinder is installed from the structural part’s top to its end. The force goes to the whole structural parts, protect the bolt from breaking off.
The alloy bit and cylinder are connected in the middle of the alloy bit. Uniformly forced, the machine won’t be damaged during working. The material of our alloy bit is military use alloy steel, with higher strength and longer using life, it can cut 5000 nos. of piles.
Chain: Professional hoisting chain with single lifting capacity of 5t, diameter 14mm,offering high safety guarantee. Equipped with adjusting buckles, the chain’s length could be adjusted according to jobsite condition easily
Structural parts—Both the material and techniques are more matured, with high standard quality control and long service life.
The two pins are used for fixing the modules and have the limit role, which is not only instead of top metal ring frame to reduce weight of the whole machine, but also avoid the pile colliding the top metal ring frame during the pile breaking.