Convenience Transportation Hydraulic Pile Breaker 690kN With 180mm Cylinder Stroke / Pile cutter

SP606 Hydraulic pile breaker which can break square pile (500-1250mm) with 9pcs of moduel.
1.Max drill rod pressure: 690kN
2.Max cylinder stroke: 180mm
3.Max cylinder pressure: 34.3MPa
4.Max sigle cylinder flow: 25L/min
5.Quanity/8h: 40-100 pcs/8h
6.Single cut pile height≦300mm
7.One-piece moudule weight: 2800kgs
8.One-piece moudule size: 908x680x380mm
9.Total weight: 2.8t

 

 

The cylinder is installed from the structural part’s top to its end. The force goes to the whole structural parts, protect the bolt from breaking off.

 

The alloy bit and cylinder are connected in the middle of the alloy bit. Uniformly forced, the machine won’t be damaged during working. The material of our alloy bit is military use alloy steel, with higher strength and longer using life, it can cut 5000 nos. of piles.

 

Chain: Professional hoisting chain with single lifting capacity of 5t, diameter 14mm,offering high safety guarantee. Equipped with adjusting buckles, the chain’s length could be adjusted according to jobsite condition easily

 

Structural parts—Both the material and techniques are more matured, with high standard quality control and long service life.

 

The two pins are used for fixing the modules and have the limit role, which is not only instead of top metal ring frame to reduce weight of the whole machine, but also avoid the pile colliding the top metal ring frame during the pile breaking.

SP400-B technical parameters
Model	SP606
Range of Pile diameter(mm)	1700-1850mm
Maximum Drill rod pressure	690KN
Maximum strake of hydraulic cylinder	180mm
Maximum pressure hydraulic cylinder	34.3Mpa
Maximum flow single cylinder	25L/min
Cut the number of pile/8h	40-100
Height for cut pile each time	≤300mm
Supporting the digging machine tonnage (excvavtor)	≥35t
One piece module weight	280kg
One piece module size	908x680x380
work status dimensions	3200-3000
Total pile breaker weight	3.7kg