|Rotary Torque:||5292/3127/1766 (Instantaneous Torque: 6174)KN.m||Revolving Speed:||0.6/1.0/1.8rpm|
|Sleeve Downforce:||Max.830 Plus Dead Weight 350kn||Operating Stroke:||750mm|
foundation drilling equipment,
The casing rotator is a kind of newly developed drilling equipment integrating the advantage of hydraulic power system and transmission device. It is controlled by mechanical, electrical and hydraulic system, featuring environmental protection and high efficiency.In recent years, our rotary drilling rig is widely used in subway construction, secant piling for foundation pit protection, discarded pile (underground obstacle) clearance, as well as high speed rail, road, bridge, and urban construction. In addition, our casing rotator is an ideal tool for reservoir dam reinforcement. Here is the specific introduction for the applications.
1. Foundation pile and diaphragm wall construction
1) Foundation piles for high-speed rail, road, bridge, and house construction.
2) Secant piling for subway platform, underground building, diaphragm wall, and other construction requiring heavy excavation.
3) Reservoir retention wall reinforcement.
2. Cobble stone, boulders and karst cave drilling
1) It supports foundation pile construction in the mountain land with cobble stone and boulder.
2) Application at coastal region is allowed, where it features thick quicksand and hole shrinkage, for foundation pile construction.
3) The piling equipment can be used for socket pile construction, also.
3. Underground obstructions clearance
In the process of urban construction and bridge reconstruction, our casing rotator can be employed for cleaning reinforced concrete pile, steel-pipe pile, steel H pile, PC pile, wooden pile, and some others, realizing foundation pile poured-in-place.
4. Rock stratum drilling
1) Rock socketed drilling for pile poured-in-place.
2) Through-hole drilling on sill for vertical shaft or ventilation hole.
5. Deep excavation
1) Poured-in-place for steel-pipe pile insertion for deep foundation improvement.
2) Deep well digging for the construction of reservoir and tunnel.
Technical Parameters of TR2605H Casing Rotator
|Working Device||Hole Dia.||mm||Φ1200-Φ2600|
|Rotary Torque||KN.m||5292/3127/1766 (Instantaneous torque: 6174)|
|Sleeve Downforce||KN||Max.830 plus dead weight 350|
|Max. Pulling Force of Sleeve||KN||3800 (Instantaneous pulling force: 4340)|
|Weight||ton||55+10 (Optional track)|
|Hydraulic Power Unit||Engine Model||-||Cummins QSM15-600|
|Fuel Consumption||g/kwh||213 (For max. power)|
|Control Mode||-||Wired remote control|
Power of Power Unit is relatively high comparing with equivalent models of other manufacturers. This high power eases the difficult working to remove the obstruction underground or cutting boulders/ bedrock. Working efficiency will increase thanks to its torque and extraction force.
We are confident that casing rotator series will respond to any request of difficult job to remove obstruction underground.