|Name:||CFA Drilling Equipment||Model:||TR220W|
|Max Drilling Depth:||20m||Max Drilling Diameter:||1000mm|
|Engine Model:||CAT C-9||Rated Power:||213kw|
20m cfa drilling rig,
continuous flight auger drilling 20m,
213kw cfa drilling rig
20m TR220W Hydraulic Mast Triangle Supporting Structure CFA Drilling Equipment
CFA drilling equipment is suitable for oil drilling equipment, well drilling equipment, rock drilling equipment, directional drilling equipment, and core drilling equipment.
SINOVO CFA drilling equipment based on continuous flight auger drilling technique is mainly used in construction to create concrete piles. It can construct a continuous wall of reinforced concrete that protects workers during excavation.
CFA piles continue the advantages of the driven piles and the bored piles, which are versatile and require no removal of soil. This drilling method enables the drilling equipment to excavate a wide variety of soils, dry or water-logged, loose or cohesive, and also to penetrate through low capacity, soft rock formation like tuff, loamy clays, limestone clays, limestone and sandstone etc.
The maximum diameter of piling reaches 1.2m and max depth achieves 30m, helping overcome problems formerly connected to project and execution of pilings.
Technical parameters of TR220W CFA Drilling Equipment
|Euro Standards||U.S. Standards|
|Max drilling depth||20m||66 ft|
|Max drilling diameter||1000mm||39in|
|Engine model||CAT C-9||CAT C-9|
|Max torque for CFA||100kN.m||73730lb-ft|
|Max crowd force of winch||210kN||47208lbf|
|Max extraction force of winch||210kN||47208lbf|
|Max pulling force of main winch (the first layer)||200kN||44960lbf|
|Max pulling speed of main winch||78m/min||256ft/min|
|Wire line of main winch||Φ28mm||Φ1.1in|
|Undercarriage||CAT 330D||CAT 330D|
|Track shoe width||800mm||32in|
|width of crawler||3000-4300mm||118-170in|
|Whole machine weight||65T||65T|