|Application:||CFA Pile, Bored Pile, Foundation Project||Undercarriage:||Original CAT Base Or Doosan Base|
|Warranty::||12month Or One Year||Drill Accessories:||Kelly Bar, CFA Tools, DW Casing|
|Hydraulic System:||Rexroth And CAT||Core Components::||PLC, Engine, Pump|
TR220W Rotary Drilling Rig is mainlyused in the construction of civil andbridge engineering, which adoptsadvanced intelligent electronic controlsystem and load sensing type pilotcontrol hydraulic system, the wholemachine is safe and reliable.
CFA drilling equipment is suitable for oil drilling equipment, well drilling equipment, rock drilling equipment, directional drilling equipment, and core drilling equipment.
Our CFA drilling equipment based on continuous flight auger drilling technique is mainly used in construction to create concrete piles. It can construct a continuous wall of reinforced concrete that protects workers during excavation.
CFA piles continue the advantages of the driven piles and the bored piles, which are versatile and require no removal of soil. This drilling method enables the drilling equipment to excavate a wide variety of soils, dry or water-logged, loose or cohesive, and also to penetrate through low capacity, soft rock formation like tuff, loamy clays, limestone clays, limestone and sandstone etc,
|Kelly drilling||Maximum nominal torque on the kelly and casingdrive||kNm||220|
|Max pile diameter||mm||1500|
|Max pile diameter with casing||mm||1200|
|Max drilling depth||m||53.5|
|CFA drilling||Max drilling depth||m||20|
|Max drilling diameter||mm||880|
|Max pull-down piston pull||kn||600|
|Max drilling torgue||kn.m||128|
|track shoe width||mm||800|
|Overall width with extended side frames||mm||4300|
|Overall width with retracted side frames||mm||3000|
|Max travelling speed||km/h||5|
|Hydraulic pumps||Main pumps||mpa||35|
|Mast||Mast raking forward||.||5|
|Mast side ranking||.||±5|
|Mast raking backwards||.||15|
|Main winch||1st Layer nominal line pull||kn||220/170|
|1st Layer nominal rope speed||m/min||70|
|rotary with high speed||Maximum nominal torque ,real values on the kellybar and casing drive adapter||KNm||200|
|Drilling speed max||rpm||56U/min|
|Crowd system||Crowd force (pull down/pull up),real values on the rotary drive||KN||210/210|
|Crowd force (pull down/pull up),real values on the rotary drive , in CFA modus||KN||50|
|Winch crowd system ,crowdway,on the complete leader||mm||15000|
|Weight (with standard kelly bar)||ton||65|
|Min working radius||mm||3570|
piling in solid ground without water infiltrations
2-Dry piles with casing protection
Performed when soil is unstable. The casing can be withdrawn or left in situ. Steel casings can be installed by means of the rotary table of the rig, by additional equipment such as hydraulic vibrators or casing oscillator.
When the drilling depth is reached, a steel reinforcement is inserted inside the excav-ated pile and concrete is poured by means of tremie pipes.
In some cases there may be a need to employ drilling fluids (such as bentonite suspension or biodegradable polymers) in order to maintain a stable shaft
-Any kind of soil conditions, including rock formations
-Large and deep piling design